Teck Leong Industries Pte Ltd

 

TEL: (65) 6790 9777
FAX: (65) 6790 9555

Benjamin Kuah
B.Acc(Hons)
benjamin@copper.asia

Jasmine Kuah
B.Acc
jasmine@copper.asia

Kuah Beng Hui
CA (Singapore)
benghui@copper.asia

Alicia Kuah
B.Acc (Hons)
alicia@copper.asia

Adrian Ngoo
M.Eng.Sc(Mech)
B.Mech.Eng (Hons 1)
adrian@copper.asia

Joe Lim
joe@copper.asia

 

Locate Us

Stainless Steel
Stainless Steel 304 / 304L   
                                  

Stainless Steel 304 is the most commonly used grade which has versatile applications. It is slightly magnetic in the drawn condition. It can be welded and is suitable for polishing and corrosive environment. It is used widely in a variety of domestic and commercial applications. Typical applications are for example, in tanks and containers for holding a large variety of liquids and solids, architectural paneling, railings & trim, chemical containers, heat exchangers, food processing equipment, domestic tool industry, etc.

Stainless Steel 304L has lower carbon than the standard 304 grade of stainless steel. It has a maximum of 0.03% carbon and it does not require post-weld annealing. It is extensively used in heavy gauge components over about 6mm.

TYPICAL CHEMICAL COMPOSITION

 

Stainless Steel 316 / 316L

Stainless Steel 316 and 316L contain Mo that improves inter-granular corrosion. They are more resistant to general corrosion and pitting than conventional nickel chromium stainless steels such as 302-304. For e.g., stainless steel cylinders and tanks manufactured in 316 grade stainless steel, have proven to withstand exceptional resistance in acidic and hard water areas. Other areas of applications are chemical & pharmaceutical industry, surgical & medical tools, ozone generators, petroleum refining equipment, etc.

Stainless Steel 316L grade has 0.03% carbon maximum and are resistant to sensitization in short term exposures or heat treatments. Most standard 316 grade of stainless steel have a maximum of 0.08% carbon and are suitable for use in non-welded parts and equipment; in case of welded applications these parts are used for light gauge application.

TYPICAL CHEMICAL COMPOSITION

 

 
Product
 
Stainless Steel Shim Plates
Stainless Steel Round Bars
Stainless Steel Flat Bar
 
Stainless Steel Angle Bar
Stainless Steel Square Bar
Stainless Steel Hexagon Bar
 
Stainless Steel U Channel
Stainless Steel Ornamental Tube / Ornamental Pipe
Stainless Steel Schedule Pipe
 
Stainless Steel Sheet & Stainless Steel Plate
Stainless Steel Checkered Plate
Stainless Steel Perforated Sheet
 
Stainless Steel Strips & Stainless Steel Coils
Stainless Steel Dividing Strip
Stainless Steel Wire
 

 

 

 
 

Disclaimer: Specifications and descriptions of the articles may change without notice. Teck Leong Industries Pte Ltd, Ban Soon Cheong Pte Ltd, Radiation Control (Asia Pacific) Pte Ltd, Eurometalli (Far East) Pte Ltd and Advance Storage Pte Ltd (known as “Our Group of Companies”) whether jointly or severally is/are not responsible for the accuracy, completeness or usefulness of information contained herein and shall not be liable for any damage, loss, injury or inconvenience arising from or in connection with the contents of this publication. All information presented in this publication is only strictly for reference purposes. Each and every member of Our Group of Companies disclaims all liability for the information presented nor is such information a warranty or representation by Our Group of Companies or any member thereof.

Login
ID
Password